The Luscious One Skein Cowl was a hit, so I decided that with the holidays coming and bulky yarns trending, it was time to make it a set - and then some! So today I'm sharing the pattern for the Luscious One Skein Crochet Hat.. and the matching Luscious One Skein Fingerless Mitts!
With just 3 skeins of Lion Brand Unique, or the bulky yarn of your choice, you can make all 3 patterns. Pick your favorite 2 for a wonderful holiday gift set, and be the best gift giver ever! Sized to fit teens to adults, they're all very quick patterns to crochet, making each perfect for last minute snow storms, craft fairs, and of course, presents!
The Luscious One Skein Crochet Hat has two versions - as written it's slightly slouchy, and very very cozy. This "dangerous slouch" really does use every inch of the skein, so only leave 6 inches or so for a tail at the beginning - and weave it in carefully when you finish up the brim! If you don't want to risk it, go with the "safe beanie" option, and omit Rounds 9 and 10, continuing with Round 11 as written. This gives you a bit more room to play. (Note - the original yarn is discontinued, so just look for a skein over 109 yds and you'll be all set!)
Luscious One Skein Crochet Hat
Add this pattern to your Ravelry Queue and Favorites
- US - M/N, 9.0 mm hook
- 109 yds bulky weight yarn (1 skein Lion Brand Unique, Grapevine shown - discontinued)
- Recommended Substitute Yarn: Red Heart Gemstone
- Click for Video Tutorials: FDC - Foundation Double Crochet; FDC in the Round; fpdc - Front Post Double Crochet/bpdc - Back Post Double Crochet; CSDC - Chainless Starting Double Crochet
- NOTE: If you do not wish to use the CSDC, ch 2 and dc in the first st. If you do not wish to use the FDC, you can ch 48 and work a row of dc, but the brim will not be as stretchy.
Round 1: FDC 48, join with a sl st to work in the round. (48 sts)
Round 2:Ch 1, fpdc in the first st, bpdc in the next st. *Fpdc in the next st, bpdc in the next st. Repeat from * to end. Join with a sl st to the first fpdc. (48 sts)
Round 3: CSDC, *ch 3, skip 3 sts, dc in the next 5 sts. Repeat from * until 7 sts remain, ch 3, skip 3 sts, dc in the last 4 sts. Join with a sl st to the CSDC. (48 sts including chs)
Round 4: CSDC, *working over the ch 3 from the previous round, work 3 dc sts into the center st of the skipped st section of the row below the previous row (Round 2). (The chs are enclosed or trapped within these sts) Dc in the next 5 sts. Repeat from * until 7 sts remain. Work 3 dc into the center st of the skipped st section of the row below the previous row, then dc in the last 4 ch. Join with a sl st to CSDC. (48 sts)
Round 5: CSDC, dc in the next 4 sts, ch 3, skip 3 sts. *Dc in the next 5 sts, ch 3, skip 3 sts. Repeat from * to end, join with a sl st to CSDC. (48 sts including chs)
Round 6: CSDC, dc in the next 4 sts, then working over the ch 3 from the previous row, work 3 dc sts into the center st of the skipped st section of the row below the previous row. *Dc in the next 5 sts, then work 3 dc into the center st of the skipped st section of the row below the previous row. Repeat from * to end, join with a sl st to CSDC. (48 sts)
Round 7 - 10: Repeat Rounds 3 - 6, omitting Round 9 and 10 for the "safe beanie" option.
Round 11: Repeat Round 3.
Round 12: CSDC, *working over the ch 3 from the previous row, work 3 dc sts into the center st of the skipped st section of the row below the previous row. Dc in the next st, dc2tog (decrease), dc in the next 2 sts. Repeat from * until 7 sts remain. Work 3 dc into the center st of the skipped st section of the row below the previous row, dc in the next st, dc2tog, dc in the last st. Join with a sl st to CSDC. (42 sts)
Round 13: CSDC, dc2tog, dc in the next st, ch 3, skip 3 sts. *Dc in the next st, dc2tog, dc in the next st, ch 3, skip 3 sts. Repeat from * to end. Join with a sl st to CSDC. (36 sts including chs)
Round 14: CSDC, dc2tog, working over the ch 3 from the previous row, work 3 dc sts into the center st of the skipped st section of the row below the previous row. *Dc in the next st, dc2tog, work 3 dc sts into the center st of the skipped st section of the row below the previous row. Repeat from * to end. Join with a sl st to CSDC. (30 sts)
Round 15: CSDC, ch 2, skip 2 sts, dc2tog. *Dc, ch 2, skip 2 sts, dc2tog. Repeat from * to end. Join with a sl st to CSDC. (24 sts including chs)
Round 16: Sl st into next ch sp. CSDC, working over the ch 2 from the previous row, work 2 dc sts into the right st of the skipped st section of the row below the previous row. *Skip 2 sts, working over the ch 2 from the previous row, work 3 dc sts into the right st of the skipped st section of the row below the previous row. Repeat from * to end. Join with a sl st to CSDC. (18 sts)
Round 17: Work a decrease over the first st and the third st with a CSDC and dc, skipping the 2nd st. *Dc2tog decrease over the next 3 sts by working into the next st, skipping the center st, and working into the third st. Repeat from * to end. Join with a sl st to CSDC. (12 sts) Break yarn and finish off, using this tail to weave the hole in the top closed. Use the first tail at the start of the hat to close up the brim, as seen in the FDC in the Round video tutorial.
And that's a hat! A one skein crochet hat, to be precise. Perfect for the first (or third) snow of the season, or just keeping the chill of your ears. I hope you enjoy the Luscious One Skein Crochet Hat pattern and find a perfect accompaniment in either the cowl or the mitts - or both!
Written pattern copyright Tamara Kelly 2013. Please do not reprint or repost this pattern, but please do link to this page to share this pattern with others. If you wish to make items for sale from this pattern, please visit the About page for details. TamaraKelly@mooglyblog.com.
mary
On row 15 shouldn't it say. *DC, ch2, skip2, dc2tog
Tamara Kelly
Right you are! Thank you mary!
CuriousTiff
I'm usually bit tight of a stitcher, but using a .M 9.0 hook and Loops and Threads Charisma Bulky Category 5, I have a length of 20.5" at only 38 FDC. Advice pretty pretty please with cherries on top? I've been dying to make this hat ever since I discovered it!!!
CuriousTiff
Using a size L 8.0 mm and like the size so far. Round 15 sdoesn't add up for me I continue to get 20 sts....
CuriousTiff
Doh! Of course my stitch count was off, I forgot that I started with 40 FDC instead of 48! pattern worked out nicely once I realized my error. Love the hat, I plan to add a bow or flower and list a project page on Ravelry .
Carolann
I was doing ok untill I got to Round 15 from there things are not working for me. I am giving it a rest for now.
Tamara Kelly
If you decide to take it out of time out and are still having trouble I'd be happy to try to help!
carolann
Thank you think i got it had a friend help. Dyslexia making pattern following ver difficult. I need to make a system that will work for me. Thank god for friends!
Tamara Kelly
Ah, I can only imagine! Sounds like a wonderful friend. 🙂
candy kemp
can you please do a video of this stitch I am horrible about reading patterns. but I can repeat and pause and restart the pc for hours lol. I would love to make this for my daughters
Tamara Kelly
I'll add it to the to do list! Thank you Candy!
Candy Kemp
Hello, Have you gotten to this scarf yet on your to do list 🙂
Tamara Kelly
I have a video tutorial for the stitch pattern HERE. 🙂
candy825
thanks so much, I am going to check it out now
Carolyn
I was doing ok until I got to round 17 is very confusing. I had to guess and do the way I though it should be. I love this hat pattern.
Tamara Kelly
Glad you were able to make it work! 🙂
Kimberly
This is such a lovely pattern! Made it for myself last night in day-glo colors, and have gotten so many compliments...bought other colors to make as gifts. Thanks again! 🙂
Faith MCCathern
I love this hat! I made one for my daughter and I'd love to make one for a 2 year old and a 6 year old. Could you help with how many FDC to start? Thanks!
Tamara Kelly
Hi Faith! Thank you! This hat uses a stitch repeat of 8, so you'll need to make a gauge swatch and figure out your stitch counts from there! 🙂
Jeanie hall
Love being able to print out the pattern BUT dony want to print out the comments. Hubby complaining about using too much ink. Thanks again
Tamara Kelly
Hi Jeanie! The Print Friendly button shouldn't print out the comments, and you can click on anything else you don't want to print to remove it too. 🙂
Tania C
Overthinking round 4...working over the ch 3; do you work into the middle st of the top ch3 or the middle of the bottom slipped stitches.
Thanks ?
Tamara Kelly
The middle of the bottom skipped stitches - there is a tutorial HERE to help. 🙂
Tania C
Oh man, I was so close to getting it right. THANK YOU so so much for your quick response!!!!
Happy New Year!!
Tamara Kelly
🙂 Thank you Tania, Happy New Year to you too!
Allison
This has nothing to do with the pattern... but no joke i look exactly like the girl modeling this hat and these gloves.
Tamara Kelly
😀 That's my daughter! How funny!
Ali
Is round 2 suppose to start with a chain 1 or should it be a chain 2? I just started this but round 2 looks funny when I do the chain 1
Tamara Kelly
I prefer a ch 1, but if you find a ch 2 looks better, then that's fine too! 🙂
Ali
I did the one chain I think it looks right but this is my first ever hat and first time using these stitches so I'll just hope for the best! lol